Please enter the article no. from our catalogue.
Foam latex - 1300 ml - Consisting of 1000 ml Component A - 300 ml Component B (activator) - a highly elastic foam for the manufacture of face masks, some masks, like ears, horns and noses up to larger Positivteilen (homogeneous surface) . Setting time min depending on size 15 - 25.
Customers who bought this product also bought the following products:
Glatzan L is a liquid plastic bald for making very thin bald heads.
Application:
Glatzan is in a well ventilated room with a brush thinly and evenly applied to a form of head and left to dry. After superficial drying, the process should be repeated at least three times to achieve the required thickness. The outer edge of the bald should only have one to two coats to achieve a very thin margin for fine over transitions. After applying the final coat should be bald by dry thoroughly (6-12 hours) before it is carefully and thoroughly powdering carefully removed from the forming head. The removal process starting at the neck and work your way slowly progressing towards forehead.
The thus prepared bald head should only be placed if they ausgedunstet well and only marginally smell of solvents.
Additional Products:
Mold Release Spray is a separator in spray form, for a great variety of uses.
For the production of artificial skin, wounds, burns, etc. - Water-based freed of solvent
CARVER SET 8 pieces with various tools for modeling work in mold or other make-up artists artworks.
30 ml bottle with brush
Sealing lacquer for the isolation of plastic materials and transitions.
Modeling mass for sculptural design of the masks motives -