Please enter the article no. from our catalogue.
1kg Hard types of plaster for the mold
Customers who bought this product also bought the following products:
An adhesive which remains sticky for several minutes after application. - For direct application to the skin (not mucosa). Suitable for foam latex, latex, wool crepe, etc. Lets face removed with water, multi-cleaner or soap
Kryolan Latexmilch - tinted - skin color.
Latex milk is a liquid, with the special effects, particularly burns and casts of noses, ears, etc. can be produced in a plaster mold.
Foam latex - 1300 ml - Consisting of 1000 ml Component A - 300 ml Component B (activator) - a highly elastic foam for the manufacture of face masks, some masks, like ears, horns and noses up to larger Positivteilen (homogeneous surface) . Setting time min depending on size 15 - 25.
Glatzan L is a liquid plastic bald for making very thin bald heads.
Application:
Glatzan is in a well ventilated room with a brush thinly and evenly applied to a form of head and left to dry. After superficial drying, the process should be repeated at least three times to achieve the required thickness. The outer edge of the bald should only have one to two coats to achieve a very thin margin for fine over transitions. After applying the final coat should be bald by dry thoroughly (6-12 hours) before it is carefully and thoroughly powdering carefully removed from the forming head. The removal process starting at the neck and work your way slowly progressing towards forehead.
The thus prepared bald head should only be placed if they ausgedunstet well and only marginally smell of solvents.