Deutsch
Please enter the article no. from our catalogue.
.png){kind=icon}
Bald-head form of red, solvent-resistant plastic in a standard size. Since the head is composed of 2 half-shells for manufacturing reasons, the seam may be slightly reworked, for example, with a nail file or sandpaper.
Recommended products:
rubber milk
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Kryolan Latexmilch - tinted - skin color.
Latex milk is a liquid, with the special effects, particularly burns and casts of noses, ears, etc. can be produced in a plaster mold.
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Skin color - with cream or Einheitsgröße- Water makeup makeup. You need the skin adhesive "mastic"
This product is compatible with:
Glatzan L is a liquid plastic bald for making very thin bald heads.
Application:
Glatzan is in a well ventilated room with a brush thinly and evenly applied to a form of head and left to dry. After superficial drying, the process should be repeated at least three times to achieve the required thickness. The outer edge of the bald should only have one to two coats to achieve a very thin margin for fine over transitions. After applying the final coat should be bald by dry thoroughly (6-12 hours) before it is carefully and thoroughly powdering carefully removed from the forming head. The removal process starting at the neck and work your way slowly progressing towards forehead.
The thus prepared bald head should only be placed if they ausgedunstet well and only marginally smell of solvents.
Glatzan L is a liquid plastic bald for making very thin bald heads.
Application:
Glatzan is in a well ventilated room with a brush thinly and evenly applied to a form of head and left to dry. After superficial drying, the process should be repeated at least three times to achieve the required thickness. The outer edge of the bald should only have one to two coats to achieve a very thin margin for fine over transitions. After applying the final coat should be bald by dry thoroughly (6-12 hours) before it is carefully and thoroughly powdering carefully removed from the forming head. The removal process starting at the neck and work your way slowly progressing towards forehead.
The thus prepared bald head should only be placed if they ausgedunstet well and only marginally smell of solvents.
Customers who bought this product also bought the following products:
Glatzan L is a liquid plastic bald for making very thin bald heads.
Application:
Glatzan is in a well ventilated room with a brush thinly and evenly applied to a form of head and left to dry. After superficial drying, the process should be repeated at least three times to achieve the required thickness. The outer edge of the bald should only have one to two coats to achieve a very thin margin for fine over transitions. After applying the final coat should be bald by dry thoroughly (6-12 hours) before it is carefully and thoroughly powdering carefully removed from the forming head. The removal process starting at the neck and work your way slowly progressing towards forehead.
The thus prepared bald head should only be placed if they ausgedunstet well and only marginally smell of solvents.
Glatzan L is a liquid plastic bald for making very thin bald heads.
Application:
Glatzan is in a well ventilated room with a brush thinly and evenly applied to a form of head and left to dry. After superficial drying, the process should be repeated at least three times to achieve the required thickness. The outer edge of the bald should only have one to two coats to achieve a very thin margin for fine over transitions. After applying the final coat should be bald by dry thoroughly (6-12 hours) before it is carefully and thoroughly powdering carefully removed from the forming head. The removal process starting at the neck and work your way slowly progressing towards forehead.
The thus prepared bald head should only be placed if they ausgedunstet well and only marginally smell of solvents.
An adhesive which remains sticky for several minutes after application. - For direct application to the skin (not mucosa). Suitable for foam latex, latex, wool crepe, etc. Lets face removed with water, multi-cleaner or soap
Spirit Gum Matt is suitable for gluing fine hair work and contains a significant proportion of the precious resin of the mastic tree.
A special remover for Old Skin Plast. It contains acetone and is inflammable.
Glatzan L is a liquid plastic bald for making very thin bald heads.
Application:
Glatzan is in a well ventilated room with a brush thinly and evenly applied to a form of head and left to dry. After superficial drying, the process should be repeated at least three times to achieve the required thickness. The outer edge of the bald should only have one to two coats to achieve a very thin margin for fine over transitions. After applying the final coat should be bald by dry thoroughly (6-12 hours) before it is carefully and thoroughly powdering carefully removed from the forming head. The removal process starting at the neck and work your way slowly progressing towards forehead.
The thus prepared bald head should only be placed if they ausgedunstet well and only marginally smell of solvents.
Additional Products:
Kryolan Latexmilch - tinted - skin color.
Latex milk is a liquid, with the special effects, particularly burns and casts of noses, ears, etc. can be produced in a plaster mold.
For the production of artificial skin, wounds, burns, etc. - Water-based freed of solvent
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Special rubber milk preparation for faking old, withered skin.
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
For the production of artificial skin, wounds, burns, etc. - Water-based freed of solvent
Glatzan L is a liquid plastic bald for making very thin bald heads.
Application:
Glatzan is in a well ventilated room with a brush thinly and evenly applied to a form of head and left to dry. After superficial drying, the process should be repeated at least three times to achieve the required thickness. The outer edge of the bald should only have one to two coats to achieve a very thin margin for fine over transitions. After applying the final coat should be bald by dry thoroughly (6-12 hours) before it is carefully and thoroughly powdering carefully removed from the forming head. The removal process starting at the neck and work your way slowly progressing towards forehead.
The thus prepared bald head should only be placed if they ausgedunstet well and only marginally smell of solvents.
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
